Видео

When you showed the bottom there's a ring around the body of the jack and the waffle /Simpson name bottom , that piece can be un-screwed to clean /replace the gears . I own about six of these super jacks 20-50 tons ,i used them to lift houses for shoring to replace foundations . They'll lift a house no problem .

Bar & Chain oil is even better than motor oil.

Parts are still available for these just look online. Looks mint, with patience it will run good, all two stroke engines can be a little temperamental at times, pay extra fit a GOOD Quality spark plug i use NGK, not Chinese unless they are EASY to get at ( not like these little saws, )

I call it junkyard box for going to salvage yard

So basically all you did was buy a new battery in use it in the jump box i thought you charge up the dead battery in use that so the dead battery is useless

"Git yer motor runnin'...."😎😎😎

WELL IM GONNA BE FIT TO BE TIED~ HAAAAAA

Just picked up the same unit today I am wondering what do those two wires do and what do they go to?

ITS A LONGEVITY THING!!!!! KEEP IT TO YOURSELF OUT THERE! WOOOOOOOOOOOOOOOOOOOOOOOOO~ ruclips.net/video/WLq78sIP6MU/видео.html

You wanna do this on a nice hot, dry day. Because the steel frame on your truck will hold moisture. And once you pack all that oil and grease onto your frame, it will trap that moisture under it. Whenever I paint steel in the colder weather, I always heat it up with a torch first to burn all the moisture out of it.

6:30 - I am showing my wife this. She doesn't believe hording pays off. Wish me luck!

The block inside you were talking about is called the sleeve and it rides on the plunger. Even if the plunger was stuck in the up position the sleeve would still be on the bottom because it's in a shutdown position. All the way down leaves the spill Port open. All the way up it completely blocks to spell port and you have full throttle.

I bought one of these at a yard sale today. I think my brake is stuck. It says in the manual to apply pressure to the handle while in down position. I have hung from the chain and no go..I think a tear down is in my future

I carry roughly 140lbs of tools in my truck plus a lunch box welder and 80lbs of spare parts in case some brakes. This guys is just getting started

You’re a real one for this

Great video Could you pls add link for the water pump replacement kit and carburetor kit thanks so much sir.

General Shepherd likes this video!

Wow! I have the same engine on an Ariens and the crack is in the same damn place. Imagine that!

Very interesting repair! I wonder, does it need nuts on the inside too so that the prevents compression and not just extension? Any updates on how well it's still running? I just used JB Weld (a lot of JB Weld) and a C-Clamp.

My hypothesis, is that over time that gasket on top will shrink which causes the clamping force of the bolts to lessen so much that the bolts can back out. I also believe that the top cover provides structural rigidity to the engine block. So once the clamping force no longer exists from the bolts to hold the top cover tight, the structural rigidity of the top cover is lost and the block starts ripping itself apart. So many people have said that the fix is to loc-tite the bolts. While that might prevent the bolts from backing out it isn't going to address the loss of clamping force as the gasket degrades. I think the real solution is to have so sort of brass washer integrated into the gasket around all the bolt holes. This would allow the clamping force to remain despite the gasket shrinking over time. At that point it's just an oil leak to fix instead of an engine block. However, you could just throw gasket maker on the top and bottom of the gasket which would probably be a more permanent fix for the leaks.

You are the man💪🏼💪🏼💪🏼🇺🇸🇺🇸

I have one I’m restoring. Yours is in better shape.

What I do on the 026 mufflers is drill the two extra holes but then open them up to join up with the original hole. I do other work to the cylinder and muffler. Clean the ports up, port match etc and check squish and that makes for a strong running saw.

very cool.

A doctor, lawyer, a Senator or a PhD in neuropsychology could never accomplish this in a million years.

Two bolts on arm and it goes forward. These are great saws! If you know how to maintain and keep this in your fleet, they will out perform most current 55 plus cc saws.

9:48 seriously ?

I want one of those things. Just need to polish the metal good for better heat radiation

just coat the whole underside with used synthetic motor oil and pine tar nothing gonna get through that

Ole peg leg referred me to your channel. All my buds to follow. We want to put a sled engine on a jr dragster eh.

Brakes are for quitters LOL😂

I just got 85 recently any chance you remember what size battery went it ?

Funny fact about the 1981 Pantera Hood Design Change. That Wedge design, was actually submitted to Arctic Enterprises by an 18 year old from Colorado. As part of an open invitation for Pantera Hood change ideas. He won the Design, and was presented the First 1981 Pantera off the Assembly Line.

Beauti

Plastic cams??? WTH Kohler?

Well done . found similar cracks too . your fix is quite involved for a 12 yr old zero turn of mine that's falling apart in other places but ill see what I can ,do Cheers warren.

Very informative chainsaw rebuild video.

This is exactly what I needed

Use joy soap pine sol has pine oil in it

needs to be belt driven and a quieter exhaust

Your pretty much a pro now on those older 80-90's ecu's. Its pretty much always bad caps with them. The cummins ecu can be repaired if you really wanted. Its a pretty basic board and rather easy to make new connections for everything. I used to do those ones once in awhile back in the day and they all typically looked like that. Don't usually accept them these days. The potting makes it take too long so there is just not much money to be made for the amount of time invested.

It's the same engine as the Evinrude 9 1/2 Twin Sport. A nice little thing. :)

I have someone who wants to sell me a 91/2 Johnson motor for $100 but has been sitting in a garage for 8years should I take the risk ?

Good luck with that

Do you need money for compressor bro ? 😧

What is the reasoning behind this ?

Do you have a kill switch I can look at for that saw?

What about semi tires that you can’t lift?

My son and I have an old Pantera in the shop that we are going to tear into shortly. I got it to fire, but it's rough.

Ace vidya.. as usual... two of my favourite uoootooberz, thank you... from North Scotland...